Scythe Sdar-2100-bk Kama Bay Amp 2000 Revb Review

Introduction

Scythe Co., Ltd, began its performance and business in Nov 2002 every bit a benefactor and a manufacturer of passive and low-dissonance PC components. Since then, Scythe is recognized for their excellent & affordable products.

Official product link:

http://www.scythe-eu.com/en/products/audio-accessory/kama-bay-amp-2000-revb.html

Packaging and accessories

The amplifier is packaged in a multicolored paper-thin box.
On the forepart side there are presented the features of the product, on the right side at that place is a general image of the amplifier while on the superlative side there is printed its proper name.

The sides of the box nowadays the features & specifications of the product.

The backside of the packaging presents the amplifier and all of its accessories using general images of them, also on the lower side at that place are listed the specification of the amplifier in six languages.

Accessories

The product comes with the following accessories:
–    1x Manual
–    1x AC Adapter
–    1x AC cablevision
–    1x Audio Cable (3.5 mm Stereo Mini – RCA / RCA – RCA / Stereo Mini – Stereo Mini)
–    2x PCI Subclass
–    2x PCI Bracket Screws
–    4x Unit Mounting Screws
–    1x iv-Pivot Peripheral Adapter
–    1x USB-Relay Cable (5-Pin ↔ iv-Pivot / 5-Pin ↔ USB-A)

Specifications

Model Proper noun: Kama Bay AMP 2000 Rev.B
Model Number: SDAR-2100
Output: – two x Speaker Channels
– 1 x Headphone
Input: three ten RCA
1 x iii.five mm Stereo-Mini
Power IC: YAMAHA YDA138 (D-3)
Number of Channels: two Stereo Channels
Maximum Output Continuous Current: ten W x 2 Channels
Maximum Efficiency: 88% (8 Ω / 10 W)
S/North Ratio: 103 dB / 95dB (Headphone)
Harmonic Distortion Rate: 0,02% (1 KHz / 8 Ω)
Headphone: 50 mW x ii Channels
Dimensions: 151 x 184 x 51 mm (When side-panels and insulators fastened)
Capability of Connecting: 1 x USB-Relay Cable
1 x USB-Ability Connector
Weight: 760 m

Features:

High Quality Performance YAMAHA IC Scrap: In order to create loftier quality sound and non to compromise in sound quality, YAMAHA YDA138 chip and a completely new PCB design is congenital into this amplifier for pure sound enjoyment. Conceived as Class-D amplifier information technology is powerful and energy saving with low heat generation.
Function variety: The Kama Bay AMP 2000 has a diverseness of input connections (3 x RCA connector, 1 x 3.five mm Stereo-Mini (jack) connector). Users can switch between the iv available channels and are able to arrange the volume, treble, and bass levels individually at whatever time.
Universal usage: The Kama Bay Amp 2000 fits perfectly into a standard xiii.34 cm (5.25 inches) internal bay. USB devices can be recharged using the build-in front USB power supply.
INPUT/OUTPUT Switch: Past selecting the knob to "Output" position the indicator shows the output of the amplifier. By selecting to "Input" position, the indicator shows the forcefulness of the device continued to the amplifier.

Visual inspection

The amplifier has a retro design, using elements such every bit rotating buttons or analog indicators. Information technology weights approximately 760g and has the following dimensions: 151 x 184 x 51 mm.

The Kama Bay AMP 2000 Rev. B model features 2 analog indicators placed in the centre of the forepart panel, these two measure the decibel levers, and when the amplifier is powered on the indicators are illuminated past a Blue LED.

On the right side, at that place are placed two rotating knobs; i that selects the input source and the other one controls the book. Below there are one USB port for charging devices and adjacent to it there is an audio jack (stereo mini), this is the input source number four.

On the left side, there are ii knobs for Bass & Treble adjustment. Beneath in that location is the ability button, a iii.5mm audio jack and the Mute button.

Two plastic plates cover the sides of the amplifier. In order for the amp to be mounted in the v.25" bay of a case, these plates must be removed.

On the backside, there are the sound connectors: Speakers left-correct, RCA Jacks. In the heart there is the switch for the input of the analog indicator while lower there is the power connector.

On the inferior side there are four rubber & plastic feet, these are detachable, each of them is held in place with the help of a metallic screw.

On the inside, the Kama Bay AMP 2000 uses a Yamaha YDA138-E amplifier with an output of 10W for both audio channels.

Omron is the manufacturer of the master relay and it is the model G5V-2, this is placed next to the amplifier.

Testing

The starting time affair that stands out is the build quality, starting from the knobs & buttons up to the analog meters and gold plated connectors.
The sound quality is very adept, it does not distort even at college values, and the option of changing the bass & tremble is welcomed.
The analog indicators offer a fast visual feedback and their source can exist changed from the switch located at the back of the amplifier, however the blue LED illumination cannot be switched off.

Here is a video sample of the indicators moving in sync with the music

The following songs were used to test the amplifier:
–    Ludovico Einaudi – Experience
–    Quixotic – Palms
–    Gramatik – Pause Loose
–    Daft Punk – Give Life Back to Music
–    Daft Punk Feat Pharrell Williams – Get Lucky
–    Daft Punk Feat Panda Bear – Doin' It Right
–    Woolymammoth – ELLA
–    Flume – Holdin On
–    Flume – Some Minds (feat. Andrew Wyatt)
–    Lorde – Tennis Court (Flume Remix)
–    Desire – Under Your Spell
–    Moog – Drive feat. Erin Renee
–    B.E.R. – The Night Begins To Shine
–    Kaleida -Recall
–    Dan Croll – From Nowhere
–    T-Rex – Become It On
–    Jimi Hendrix – Foxy Lady
–    Jimi Hendrix – Imperial Brume
–    Creedence Clearwater Revival – Fortunate Son

Final thoughts

The latest addition to the Kama Bay line, brings some important changes such equally the added audio ports, the two analog indicators and the possibility of adjusting the Bass & Tremble.
The amplifier can be utilized separately of the system; however, by detaching the 4 anxiety and two plastic plates, information technology tin can be mounted inside a 5.25" bay.
Considering its 50 Euros price tag, the amplifier offers numerous options for configuring an audio system, also the retro design is a change from the usual amplifier look.
Every bit an comeback, it would be useful if the LED illumination of the db indicators could exist switched off, as well the circuitry insulation needs some improvement. As long as the amplifier is used with its defended ability supply, in that location are no interference in the audio, however when information technology is being replaced with a Molex connector, so the interference in the audio channels are to the level of the connector's quality.

kneelandtherhold1940.blogspot.com

Source: https://tech-legend.com/reviews/scythe-kama-bay-amp-2000-rev-b/

Share this post